Tag Archives: Hydraulic Equipment

Yuken : Pressure relief valve

Pressure relief valve :

Dear friends today we are going to discuss about pressure relief valve :

Pressure relief valve : The purpose of a pressure relief valve is to control or limit surges of pressure within pipelines, acting as protection for the system, and defending against instrument or equipment failure. They are usually present in clean water industries. MGA Controls are experts in the specification and supply of Pressure Relief Valves for a wide range of industries and applications. Read on to find out more about the purpose of a pressure relief valve and pressure relief valve features.

The main purpose of a pressure relief valve is to protect life, environment and property. A pressure relief valve is a safety device, in numerous instances, the final safeguarding measure. It is important that the valve is maintained and operating at all times and under all circumstances.Pressure relief valve operation depends on the Singer pilot sensing upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot setting. The valve opens rapidly to relieve damaging overpressure and closes smoothly at an adjustable speed when the pressure returns below the set-point.

There are many kinds of pressure relief valves, however, spring-loaded relief valves are one of the most prevalent.Singer Dynamic Lifter is a direct-acting spring-loaded relief valve that opens when the inlet pressure exceeds the set-point and closes drip-tight when pressure falls below the set-point. A compact sewage relief valve that is suitable for high pressures up to 200psi, responds very quickly, and is compact enough to fit into the most stringent space requirements.

The pressure relief valve features are mentioned below :
-Low maintenance
-Hygienic and minimal time to flush and test operations
-Eliminates surges and prolongs pipe life
-Handles higher pressure applications effectively
-Closes drip-tight
-Premium materials reduce maintenance, providing the lowest long-term cost of ownership
-Adjustable closing speed
-Utilises compress air or plant air

For further Technical details or Inquiries mail to info@jsdgroup.in or visit
 www.jsdgroup.in

Some of the regular used model available  in ex-stock

BG-03-H-P-32
BG-03-P-32
BG-03-P-V-32
BG-06-P-32
BG-06-H-P-32
BG-06-V-32BG-06-P-V-32


​​

Advertisements

Happy Republic Day 

Happy Republic Day 

Republic Day honors the date on which the Constitution of India came into effect on 26 January 1950 replacing the Government of India Act (1935) as the governing document of India.

The Constitution was adopted by the Indian Constituent Assembly on 26 November 1949, and came into effect on 26 January 1950 with a democratic government system, completing the country’s transition towards becoming an independent republic. 26 January was chosen as the Republic day because it was on this day in 1930 when Declaration of Indian Independence (Purna Swaraj) was proclaimed by the Indian National Congress as opposed to the Dominion status offered by British Regime.

https://youtu.be/Whi9MEhVbaE

Wishing you all a very Happy Republic Day. 

Jai Hind!!

YUKEN DOUBLE VANE PUMP

Double vane pump :

Double pump is comprised of a single housing containing of two PV2R single pumps configured in tandem and it is driven by a common shaft. Ports include one suction and two discharge ports. The output flow is used to directly separate circuits through the dual discharge ports.PV2R24A and PV2R34A is large volume double vane pumps they are space-saving model from Yuken that is known for its low-noise operation. to comply with a wide range of application for instence the injection molding machine industry, we provide the wide range of delivery volume [5.8 -237.0 cm/rev] for the pump. The main internal spare parts of the pumps are built in as catidge kit. There for the maintenance can be easily done by simply changing the cartridges.

double vane pump pv2r 12-31-33
Hydraulic pumps are used in hydraulic drive systems and it can be hydrostatic or hydrodynamic. A hydraulic pump is a mechanical source of power that converts mechanical power into hydraulic energy (hydrostatic energy i.e. flow, pressure). It generates flow with enough power to overcome pressure induced by the load at the pump outlet. When a hydraulic pump operates, it creates a vacuum at the pump inlet, which forces liquid from the reservoir into the inlet line to the pump and by mechanical action delivers this liquid to the pump outlet and forces it into the hydraulic system. Hydrostatic pumps are positive displacement pumps while hydrodynamic pumps can be fixed displacement pumps, in which the displacement (flow through the pump per rotation of the pump) cannot be adjusted, or variable displacement pumps, which have a more complicated construction that allows the displacement to be adjusted. Hydrodynamic pumps are more frequent in day-to-day life. Hydrostatic pumps of various types all work on the principle of Pascal’s law.

For further Technical details or Inquiries mail to info@jsdgroup.in or visit
http://www.jsdgroup.in

This slideshow requires JavaScript.

some of Yuken regular Double vane pump available ex stock :

PVR1050-F-F-6-13-REAA-1180
PVR1050-F-F-17-26-REAA-1180
PVR1050-F-F-6-30-REAA-1181
PVR1050-F-F-6-39-REAA-1181
PVR1050-F-F-6-20-REAA-1182
PVR1050-F-F-6-45-REAA-1180
PVR1050-F-F-4-26-REAA-1180
PVR1050-F-F-4-20-REAA-1180
PVR1050-F-F-10-45-REAA-1180
PVR1050-F-F-17-39-REAA-1180
PVR1050-F-F-8-20-REAA-51-1180
PVR1050-F-F-17-51-REAA-1180
PVR1050-F-F-39-110-REAA-1180
PVR1050-F-F-17-20-REAA-1181
PVR1050-F-F-12-20-REAA-1181
PVR1050-F-F-17-45-REAA-1180
PVR1050-F-F-15-45-REAA-1180
PVR1050-F-F-17-30-REAA-1180
PVR1050-F-F-15-39-REAA-1180
PVR1050-F-F-12-39-REAA-1180
PVR1050-F-F-12-30-REAA-1180
PVR1050-F-F-15-30-LEAA-1180
PVR50150-F-F-13-90-REAA-1580
PVR50150-F-F-13-110-REAA-1580
PVR50150-F-F-13-140-REAA-1580
PVR50150-F-F-26-90-REAA-1580
PVR50150-F-F-26-110-REAA-1580
PVR50150-F-F-20-70-REAA-1580
PVR50150-F-F-26-70-REAA-1580
PVR50150-F-F-20-90-REAA-1580
PVR50150-F-F-30-110-REAA
PVR50150-F-F-30-90-REAA
PVR50150-F-F-20-60-REAA-1580
PVR50150-F-F-26-60-REAA-1580
PVR50150-F-F-20-110-REAA-1580
PVR50150-F-F-26-170-REAA-1580
PVR50150-F-F-30-60-REAA-1580
PVR50150-F-F-30-140-REAA-1580
PVR50150-F-F36-60-REAA-1580
PVR50150-F-F-39-140 REAA-1580
PVR50150-F-F-39-110-REAA-1580
PVR50150-F-F-45-110-REAA-1580
PVR50150-F-F-39-60 REAA-1580
PVR50150-F-F-45-70 REAA-1580
PVR50150-F-F-45-90 REAA-1580
PVR50150-F-F-51-70-REAA
PVR50150-F-F-39-70-REAA
PVR50150-F-F-39-90-REAA
PVR50150-F-F30-70-REAA-1580
PVR50150-F-F-30-170-REAA-1580
PVR50150-L-F-51-170-REAA

Yuken Hydraulic Training -delhi

AR-2

Introduction

Knowledge and skills of the employees are the key factor that enhances productivity. Hydraulic equipment is used widely to improve efficiency, quality and reduce fatigue.

It is a vital technology for many Industries. Keeping this in view, we at Yuken India Limited started training in

“Hydraulics” 24 years back at Bangalore. So far we have trained more than 16,000 personnel.

We also have a hydraulic training facility at New Delhi in our North zone office to cater to the Hydraulics training needs in this region. We are bringing the training closer to your work spot. This will enable you to train more of

your personnel in hydraulics.

We have limited seats (only 15 in each course). Hence, you are requested to register early as seats are reserved on a first come first serve basis.

Earlier participants have given feedback on the direct benefits of the course in terms of reduced downtime, better quality, increased productivity and general cost saving.

Highlights

        Trained more than 16,000 personnel in total &

1000 personnel at our north zone office in New

Delhi.

    Our Hydraulic Training team has 30 man years of experience in imparting Hydraulics training.

    State of the art training kit from Japan & actual Hydraulic components & Cut-sections are used for Hands on training.

PAN NO.: AAACY1160E

Goods & Service Tax No. : 07AAACY1160E1ZP SAC :999293

Service Description : Commercial training and Coaching Services

Who should Attend

All managers / officers / engineers / supervisors / assistants / technicians who need to know about hydraulics, from maintenance, production, design, projects, training, quality, purchase, planning, materials, sales departments will benefit immensely from these programmes.

Course contents

        Basics of Hydraulics.

        Principle and Construction of Hydraulic Pumps.

        Principle and Construction of Pressure, Flow and Direction control valves.

        Principle and Construction of Modular valves.

        Principle, Construction and working of Cylinders and Hydraulic Motors.

        Hydraulic Circuits – Graphical symbols & understanding and interpreting hyd. circuits.

        Hydraulic System Accessories.

        Hydraulic Fluids, Contamination and Filtration.

        Maintenance and Trouble Shooting of Hydraulic Systems.

        Practical exercises in Assembly of Hydraulic Pumps & Valves

        Hands on training in rigging of hydraulic circuits on trainer kit.

Venue – Yuken India Ltd – North Zone office. Yuken India Ltd

26, Community center, Phase 1

Mayapuri Industrial area

New Delhi – 110064

Phone: 011 41833315

Schedule for the Financial year (upto August 2018)

Course no. NZBH-18/18:  25-28 June 2018

Course no. NZBH-19/18:  20-23  August 2018

PAN NO.: AAACY1160E

Goods & Service Tax No. : 07AAACY1160E1ZP SAC :999293

Service Description : Commercial training and Coaching Services

Course Fee

Rs.13,570/-

(Rs.11,500+ 18% GST (Goods & Service Tax) Per participant

Fee includes:

Comprehensive course material.

Lunch, Refreshments & Tea during the course.

Note: Discount for multiple participants:

2 participants – 5%  discount.

3 & above participants – 10% discount.

Registration

Send your nominations for registration by email to both

Ms. Sreeja R.S,

Course Coordinator- Hydraulic School

YUKEN INDIA LIMITED

B-80, 2nd Cross, 1st Phase

Peenya Industrial Area, Bengaluru – 560 058

E-mail: training@yukenindia.com

Mobile: 09900589476

Mr. Roshan Lilhare,

Executive

YUKEN INDIA LIMITED – North Zone

26, Community center, Phase 1

Mayapuri Industrial area

New Delhi – 110064

E-mail: roshan.lilhare@yukenindia.com

Mob: 09871893316

 

Specifying:

i) Name of the Participant(s), Designation ii) Course Name, No., & Date

 

Payment of Fee:

[ either (a) or (b) below ]

(a) Through Online Fund Transfer to the following Account: Account Holder: Yuken India Limited

Account No. / Type: 10605523044 / Cash Credit Account

Bank Name: State Bank of India, SME Branch, Mahadevapura, Whitefield Road, Bengaluru – 560 048, Karnataka, India

RTGS / IFSC No.: SBIN0003028

 

 

(b) Through Demand Draft payable at Delhi / Cheque payable at par in favour of YUKEN INDIA LTD, & send to the following address:

Mr. Roshan Lilhare, Executive

Yuken India Ltd

26, Community center, Phase 1, Mayapuri Industrial area, New Delhi – 110064

E-mail: roshan.lilhare@yukenindia.com

Mob: 09871893316

JSD ENGINEERING PRODUCTS – YUKEN

 

JSD Engineering Products

YUKEN  Authorize Dealer

CALL : AJAY PANDEY  9818079220

VISIT : www.jsdgroup.in

   www.jsdgroup.co.in

www.yukendealer.com

 

logo

YUKEN INDIA LIMITED – JSD

For Any requirement In Yuken Hydraulics Products Kindly click on the below links
If you have any questions, feel free to get in touch.
From JSD Engineering Products- Yuken (AJAY PANDEY – 98180789220)