call : 9818079220
Piston Pump
call : 9818079220
Dear friends today we are going to discuss about pressure relief valve :
Pressure relief valve : The purpose of a pressure relief valve is to control or limit surges of pressure within pipelines, acting as protection for the system, and defending against instrument or equipment failure. They are usually present in clean water industries. MGA Controls are experts in the specification and supply of Pressure Relief Valves for a wide range of industries and applications. Read on to find out more about the purpose of a pressure relief valve and pressure relief valve features.
The main purpose of a pressure relief valve is to protect life, environment and property. A pressure relief valve is a safety device, in numerous instances, the final safeguarding measure. It is important that the valve is maintained and operating at all times and under all circumstances.Pressure relief valve operation depends on the Singer pilot sensing upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot setting. The valve opens rapidly to relieve damaging overpressure and closes smoothly at an adjustable speed when the pressure returns below the set-point.
There are many kinds of pressure relief valves, however, spring-loaded relief valves are one of the most prevalent.Singer Dynamic Lifter is a direct-acting spring-loaded relief valve that opens when the inlet pressure exceeds the set-point and closes drip-tight when pressure falls below the set-point. A compact sewage relief valve that is suitable for high pressures up to 200psi, responds very quickly, and is compact enough to fit into the most stringent space requirements.
The pressure relief valve features are mentioned below :
-Low maintenance
-Hygienic and minimal time to flush and test operations
-Eliminates surges and prolongs pipe life
-Handles higher pressure applications effectively
-Closes drip-tight
-Premium materials reduce maintenance, providing the lowest long-term cost of ownership
-Adjustable closing speed
-Utilises compress air or plant air
Some of the regular used model available in ex-stock
BG-03-H-P-32
BG-03-P-32
BG-03-P-V-32
BG-06-P-32
BG-06-H-P-32
BG-06-V-32BG-06-P-V-32
Introduction
Knowledge and skills of the employees are the key factor that enhances productivity. Hydraulic equipment is used widely to improve efficiency, quality and reduce fatigue.
It is a vital technology for many Industries. Keeping this in view, we at Yuken India Limited started training in
“Hydraulics” 24 years back at Bangalore. So far we have trained more than 16,000 personnel.
We also have a hydraulic training facility at New Delhi in our North zone office to cater to the Hydraulics training needs in this region. We are bringing the training closer to your work spot. This will enable you to train more of
your personnel in hydraulics.
We have limited seats (only 15 in each course). Hence, you are requested to register early as seats are reserved on a first come first serve basis.
Earlier participants have given feedback on the direct benefits of the course in terms of reduced downtime, better quality, increased productivity and general cost saving.
Highlights
Trained more than 16,000 personnel in total &
1000 personnel at our north zone office in New
Delhi.
Our Hydraulic Training team has 30 man years of experience in imparting Hydraulics training.
State of the art training kit from Japan & actual Hydraulic components & Cut-sections are used for Hands on training.
PAN NO.: AAACY1160E
Goods & Service Tax No. : 07AAACY1160E1ZP SAC :999293
Service Description : Commercial training and Coaching Services
Who should Attend
All managers / officers / engineers / supervisors / assistants / technicians who need to know about hydraulics, from maintenance, production, design, projects, training, quality, purchase, planning, materials, sales departments will benefit immensely from these programmes.
Course contents
Basics of Hydraulics.
Principle and Construction of Hydraulic Pumps.
Principle and Construction of Pressure, Flow and Direction control valves.
Principle and Construction of Modular valves.
Principle, Construction and working of Cylinders and Hydraulic Motors.
Hydraulic Circuits – Graphical symbols & understanding and interpreting hyd. circuits.
Hydraulic System Accessories.
Hydraulic Fluids, Contamination and Filtration.
Maintenance and Trouble Shooting of Hydraulic Systems.
Practical exercises in Assembly of Hydraulic Pumps & Valves
Hands on training in rigging of hydraulic circuits on trainer kit.
Venue – Yuken India Ltd – North Zone office. Yuken India Ltd
26, Community center, Phase 1
Mayapuri Industrial area
New Delhi – 110064
Phone: 011 41833315
Schedule for the Financial year (upto August 2018)
Course no. NZBH-18/18: 25-28 June 2018
Course no. NZBH-19/18: 20-23 August 2018
PAN NO.: AAACY1160E
Goods & Service Tax No. : 07AAACY1160E1ZP SAC :999293
Service Description : Commercial training and Coaching Services
Course Fee
Rs.13,570/-
(Rs.11,500+ 18% GST (Goods & Service Tax) Per participant
Fee includes:
Comprehensive course material.
Lunch, Refreshments & Tea during the course.
Note: Discount for multiple participants:
2 participants – 5% discount.
3 & above participants – 10% discount.
Registration
Send your nominations for registration by email to both
Ms. Sreeja R.S,
Course Coordinator- Hydraulic School
YUKEN INDIA LIMITED
B-80, 2nd Cross, 1st Phase
Peenya Industrial Area, Bengaluru – 560 058
E-mail: training@yukenindia.com
Mobile: 09900589476
Mr. Roshan Lilhare,
Executive
YUKEN INDIA LIMITED – North Zone
26, Community center, Phase 1
Mayapuri Industrial area
New Delhi – 110064
E-mail: roshan.lilhare@yukenindia.com
Mob: 09871893316
Specifying:
i) Name of the Participant(s), Designation ii) Course Name, No., & Date
Payment of Fee:
[ either (a) or (b) below ]
(a) Through Online Fund Transfer to the following Account: Account Holder: Yuken India Limited
Account No. / Type: 10605523044 / Cash Credit Account
Bank Name: State Bank of India, SME Branch, Mahadevapura, Whitefield Road, Bengaluru – 560 048, Karnataka, India
RTGS / IFSC No.: SBIN0003028
(b) Through Demand Draft payable at Delhi / Cheque payable at par in favour of YUKEN INDIA LTD, & send to the following address:
Mr. Roshan Lilhare, Executive
Yuken India Ltd
26, Community center, Phase 1, Mayapuri Industrial area, New Delhi – 110064
E-mail: roshan.lilhare@yukenindia.com
Mob: 09871893316
YUKEN | India | JSD Engineering Products- YUKEN
Flow Control Valves Exporter,Pressure Control Valves Supplier|India